AgaMatrix iBGStar Owner's Manual page 41

Example of 100% full battery power:
Connect your iPhone or iPod touch to your meter to charge
both devices at the same time.
You cannot perform a test while a cable is plugged into the
micro-USB port and the meter's battery is charging.
How to charge the iBGStar Meter using the iPhone or iPod
touch:
[1] Connect your meter to the iPhone or iPod touch.
[2] Turn your iPhone or iPod touch on. The meter will not
charge while the iPhone or iPod touch is hibernating. The
battery status and charging battery symbol will appear on the
meter display for 5 seconds.
The meter will continue to charge using power from your
iPhone or iPod touch as long the iPhone or iPod touch is not
hibernating.
How to charge the iBGStar Meter by connecting to your PC:
[1] Insert the micro-USB connector end of the cable into
the iBGStar Meter's micro-USB port.
[2] Ensure that your PC is on and insert the USB connector
end of the cable into the PC's USB port. Ensure that the USB
port you plug in to is part of your computer's CPU or directly
78
into your laptop. The meter will not charge while the PC is off.
The battery status and charging battery symbol will appear
on the meter display.
You can check your battery status in a number of ways:
1. If the battery is 50% or less charged, press the meter's
button or insert a new test strip to see how much
charge is left.
2. Attach your meter to your iPhone or iPod touch with
the App open. This will only show you the battery
symbol, not the percent of batttery that is left. Close
the app, deactivate the iPhone or iPod touch, then
press the meter's button to see the percent battery left.
3. Plug in your meter to the USB charging cable. After two
minutes, the meter will deactivate. Press the meter's
button to see the percent battery left.
You can sync your iPhone or iPod touch to iTunes (on your PC)
via the micro-USB to USB Cable, while connected to your meter.
79