AgaMatrix iBGStar Owner's Manual page 19

Connect your meter to your iPhone or iPod touch by inserting
the meter's dock connector into the iPhone or iPod touch's
dock connector port. The dock connector port is located
below the home button of either device. Your meter and
the app will sync upon connection. The battery status and
charging battery symbol will appear on your meter's display.
Example Results:
If your iBGStar meter is already connected to your iPhone
or iPod touch, then launch the iBGStar Diabetes Manager
Application to begin syncing between your meter and the app.
Note: Attaching iBGStar to an iPhone or iPod touch in the
sleep/off mode will not turn the iPhone on. The iBGStar screen
will activate and the charging icon will appear.
34
[2] Inserting a BGStar Test Strip:
Insert a new BGStar Test Strip into the meter's test strip port. Make
sure you insert the test strip, with the contact bars facing towards
you, into the test strip port. The meter will be activated.
With iPhone or iPod touch:
You cannot perform a test while a cable is plugged into the
micro-USB port and the meter's battery is charging.
[3] iBGStar Meter Ready For Test:
The meter now displays the Apply Sample to Test Strip
Animation.
Apply Sample to Test Strip
Animation:
Without iPhone or iPod touch:
35