AgaMatrix iBGStar Owner's Manual page 27

[6] Applying Blood Sample:
The meter should still display the Apply Sample to Test Strip
Animation.
Apply Sample to Test Strip
Animation:
Bring Test Strip to Blood Sample:
• Immediately bring the BGStar Test Strip to the blood
sample. The test strip fills from the tip. Do not try to
smear blood on the top surface.
The BGStar Test Strip acts like a sponge and draws the blood
into the test strip through the sample area. The visual fill
window of the BGStar Test Strip will turn red.
50
This is the visual
fi ll window. Do not
apply blood here.
APPLY BLOOD HERE.
[7] Remove Your Finger From the Test Strip When the Test
Strip's Visual Fill Window Completely Turns Red:
The sample applied symbol will appear
on the meter's screen and your iPhone or
iPod touch will beep when you should
remove the test strip from the blood sample. It will only
beep when sound is enabled and your meter is connected
to your iPhone or iPod touch, the app is launched, and the
device's volume level is audible.
Sample applied symbol:
The Calculating Animation (a sequence of bars
and 1,2,3) will begin on the meter display.
This animation indicates that a sample has
been applied to the test strip and the meter
is calculating the test result.
In addition, if the meter is connected to an
iPhone or iPod touch and the app is launched,
the app will display an
Calculating Animation:
animation showing
that the meter is
calculating the test
result.
The entire visual fi ll
window must turn red.
WARNING: If the visual
fi ll window does not
completely fi ll, you may
get an inaccurate result.
Retest and ensure that
the visual fi ll window is
completely full.
1
2
3
51