Setting The Mealtime Tag; Setting Meter Volume; Setting The Time - AgaMatrix WaveSense JAZZ Owner's Manual

11

Setting the Mealtime Tag

The AgaMatrix WaveSense JAZZ Meter allows you to turn ON
or OFF the feature that tags results as having occurred before
or after a meal.
[1] When your meter is deactivated, press the TICK ( ) button
once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow buttons
until the word "TAG" is displayed.
[3] Press the TICK ( ) button to enter and edit
the tag setting.
[4] Turn the tagging feature ON or OFF with
the DOWN ( ) or UP ( ) arrow buttons.
Your selection will be highlighted by the
blinking of the symbol. Press the TICK ( )
button to confirm your selection and return
to the menu.
12

Setting Meter Volume

[1] When your meter is deactivated, press the
TICK ( ) button once to enter menu mode. The
word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow but-
tons until the word "BEEP" is displayed.
42
8100-02301 Rev G Artwork, Guide, Owners, mmol/L, AgaMatrix, WaveSense Jazz SEC, UK
[3] Press the TICK ( ) button to enter and edit the alarm
volume setting.
[4] Turn the volume ON or OFF with the DOWN
( ) or UP ( ) arrow buttons. Your selection
will be highlighted by the blinking of the sym-
bol. Press the TICK ( ) button to confirm your
selection and return to the menu.
Note: The meter will always produce a beeping sound after you
have applied blood or control solution to a test strip. This sound
lets you know when to take your blood sample or control solution
away from the test strip. You will hear this sound if the volume is
set to ON or OFF.
13

Setting the Time

IMPORTANT: Check the Time and Date settings before
testing. In order to properly use the meter it is important to
ensure that the time and date are set correctly.
[1] When your meter is deactivated, press the TICK ( ) button
once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow but-
tons until the word "TIME" is displayed. Press
the TICK ( ) button to enter and edit the time
settings.
[3] You should see a display with the mes-
sage blinking "12hr" or "24hr", this means you are ready to set
the meter's time. Select the 12 or 24 hour clock format with
43