Ibgstar Meter Battery And Charging - AgaMatrix iBGStar Owner's Manual

17

iBGStar Meter Battery and Charging

NOTE: The iBGStar Meter must be charged before use.
If your Meter display does not turn on by:
(1) Pressing the meter button
into your iPhone or iPod touch, the meter must be charged by
connecting it to the power adapter or a computer.
Charge your meter until the low battery symbol appears.
When the symbol appears, you can unplug the meter and
begin testing.
Example of a Low Battery with charging symbol:
You cannot perform a test while a cable is plugged into the
micro-USB port and the meter's battery is charging.
How to charge the iBGStar Meter using the power adapter:
[1] Insert the micro-USB connector end of the cable into
the iBGStar Meter's micro-USB port.
76
or (2) plugging the meter
[2] Insert the USB connector end of the cable into the
power adapter's USB port.
[3] Plug the power adapter into a wall outlet (100-240v,
50-60 Hz). The battery status and charging battery symbol
will appear on the meter display.
NOTE: The iBGStar Meter should be charged frequently. It is
recommended to charge the device whenever the display
shows less than a 50% charge. This will ensure the longest
possible life. The iBGStar must be recharged at least every
6 months to maintain device functionality.
When the iBGStar Meter is connected to the power adapter or
computer, the Battery image will appear.
The iBGStar Meter will take 3-5 hours to fully charge. Your
iBGStar is fully charged once the display shows the full
battery symbol.
77