Syncing - AgaMatrix iBGStar Owner's Manual

13

Syncing

The first time you connect an iBGStar meter to the app on your
iPhone or iPod touch, you will be prompted with a message. If
this is your first time connecting the meter, follow instructions
in Chapter 12.
After the fi rst sync between an iBGStar Meter and the
app, syncing will happen automatically when:
You connect the meter to your iPhone or iPod touch
with the app launched.
You launch the app with your meter already connected to
the iPhone or iPod touch.
Ensure that the time and date is properly set on your iPhone
or iPod touch before syncing your meter to your iPhone or
iPod touch. For instructions on how to set the time and date
on your iPhone or iPod touch, refer to the support materials
for each device. The time and date from your iPhone or iPod
touch will be used to set the time and date on your meter
whenever it syncs.
62
During every sync:
Any new data with a time and date will be downloaded
from the meter to the app.
The meter is configured to match the iPhone or iPod
touch's time and date.
The meter's battery will charge.
All test result scorecards in the iBGStar Application
with data that has been downloaded from the iBGStar
meter will have a Lock icon in the upper left corner
(in place of the Delete icon). The Lock icon indicates that the
test result value and associated time and date cannot be
deleted or edited. Carbs, Insulin, Tag, and Notes can still be
added or edited for blood glucose scorecards. To learn how
to edit your Carbs, Insulin, Tag, and Notes refer to the iBGStar
Diabetes Manager Application User's Guide.
If you disconnect the meter from the iPhone or iPod touch
during a sync, all new data may not completely download and
the meter's time and date may not match the iPhone or iPod
touch's time and date.
63