Setting The Time - AgaMatrix WaveSense JAZZ Owner's Manual

[3] Press the CHECK ( ) button to enter and edit the alarm
volume setting.
[4] Turn the volume ON or OFF with the DOWN
( ) or UP ( ) arrow buttons. Your selection
will be highlighted by the blinking of the
symbol. Press the CHECK ( ) button to confirm
your selection and return to the menu.
Note: The meter will always produce a beeping sound after you
have applied blood or control solution to a test strip. This sound
lets you know when to take your blood sample or control solution
away from the test strip. You will hear this sound if the volume is
set to ON or OFF.
13

Setting the Time

IMPORTANT: Check the Time and Date settings before
testing. In order to properly use the meter it is important to
ensure that the time and date are set correctly.
[1] When your meter is deactivated, press the CHECK ( ) but-
ton once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow but-
tons until the word "TIME" is displayed. Press
the CHECK ( ) button to enter and edit the
time settings.
[3] You should see a display with the message
blinking "12hr" or "24hr", this means you are ready to set the
meter's time. Select the 12 or 24 hour clock format with the
42