Setting The Mealtime Tag; Setting Meter Volume; Setting The Time - AgaMatrix Jazz Owner's Manual

11

Setting the Mealtime Tag

The AgaMatrix Jazz Meter allows you to turn ON or OFF the
feature that tags results as having occurred before or after a
meal.
[1] When your meter is deactivated, press the CHECK ( )
button once to enter menu mode. The word
"MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow buttons
until the word "TAG" is displayed.
[3] Press the CHECK ( ) button to enter and
edit the tag setting.
[4] Turn the tagging feature ON or OFF with
the DOWN ( ) or UP ( ) arrow buttons. Your
selection will be highlighted by the blinking
of the symbol. Press the CHECK ( ) button to
confirm your selection and return to the menu.
12

Setting Meter Volume

[1] When your meter is deactivated, press the
CHECK ( ) button once to enter menu mode.
The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow
buttons until the word "BEEP" is displayed.
40
[3] Press the CHECK ( ) button to enter and edit the alarm
volume setting.
[4] Turn the volume ON or OFF with the DOWN
( ) or UP ( ) arrow buttons. Your selection
will be highlighted by the blinking of the
symbol. Press the CHECK ( ) button to confirm
your selection and return to the menu.
Note: The meter will always produce a beeping sound after you
have applied blood or control solution to a test strip. This sound
lets you know when to take your blood sample or control solution
away from the test strip. You will hear this sound if the volume is
set to ON or OFF.
13

Setting the Time

IMPORTANT: Check the Time and Date settings before
testing. In order to properly use the meter it is important to
ensure that the time and date are set correctly.
[1] When your meter is deactivated, press the CHECK ( ) but-
ton once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow but-
tons until the word "TIME" is displayed. Press
the CHECK ( ) button to enter and edit the
time settings.
[3] You should see a display with the message
blinking "12hr" or "24hr", this means you are ready to set the
meter's time. Select the 12 or 24 hour clock format with the
41