Operating
7.1 Remote operation
7.1.3.4
Security
Navigate to Configure/Setup > Security to access:
Remote access, see REMOTE LOCKOUT (5.2.) (Page 146)
Note
If access control is changed to limit remote access, it can only be reset via the handheld
programmer.
● Write Protect (read only)
Local Access
● Local Operation Enable
Local access
● Local Operation Enable
See also Password protection (Page 96)
7.1.3.5
Device Diagnostics
Click on the Device Diagnostics bar at the bottom of the navigation window for access to Device
Status.
94
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD