Operation (Diag); Communication (Diag); Configure/Setup (Resource Block - Resource) - Siemens SITRANS L Operating Instructions Manual

Identification:
• TAG
• Descriptor
• Transducer Block Type
• Strategy
• Plant Unit
Note
For descriptions of Identification parameters see Identification (LTB) (Page 74).
7.1.11.2

Operation (DIAG)

Navigate to Configure/Setup > DIAG > Operation.
Block Modes:
• Actual Mode
• Target Mode
• Permitted Mode
• Normal Mode
Note
For descriptions of Block Modes see Operation (LTB) (Page 75).
7.1.11.3

Communication (DIAG)

Navigate to Configure/Setup > DIAG > Communication.
Communication:
• Static Revision No. [see Static Revision Number (2.6.1.)]
7.1.12

Configure/Setup (Resource Block - RESOURCE)

Note
For more detailed explanations of the parameters listed below see the pages referenced.
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Remote operation
7.1 Operating via AMS Device Manager
91