Communication (Diag); Configure/Setup (Resource Block - Resource); Identification (Resource) - Siemens SITRANS LR250 Operating Instructions Manual
Radar transmitters
Hide thumbs
Also See for SITRANS LR250:
- Operating instructions manual (306 pages) ,
- Quick start manual (272 pages) ,
- Instruction manual (175 pages)
Table of Contents
Advertisement
7.1.11.3
Communication (DIAG)
Navigate to Configure/Setup > DIAG > Communication.
Communication:
● Static Revision No. [see Static Revision Number (2.6.1.)]
7.1.12
Configure/Setup (Resource Block - RESOURCE)
Note
For more detailed explanations of the parameters listed below see the pages referenced.
7.1.12.1
Identification (RESOURCE)
Navigate to Configure/Setup > RESOURCE > Identification for access to:
Identification
● TAG: Read only. Description for the associated block: device tag prefixed by block type.
● Descriptor [see Descriptor (2.1.2.)]
● Message [see Message (2.1.3.)]
● Date (Installation Date): The user entered date on which the device was installed in the
system.
● Strategy: Used to identify grouping of blocks.
● Plant Unit: The identification number of the plant unit. For example, can be used in the host
for sorting alarms.
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 08/2014, A5E32221411-AC
Remote operation
7.1 Operating via AMS Device Manager
111
Advertisement
Table of Contents
