Mounting Methods; When Using The Compact Type - Panasonic SG-P Series Instruction Manual

3.2 Mounting Methods

3.2 Mounting Methods

Mount the switch body on a machine unit or on a guard and mount the actuator on a movable
door. Use M4 screws, flat washers, and spring washers to mount the device and firmly tighten
them to the specified tightening torque.

3.2.1 When using the Compact Type

● Do not use the visible type actuator for detection
● Do not install the switch body of this device on a movable door.
● With the low-code type of this device, the switch body detects another SG-P Series
actuator. Do not carelessly disable the switch body and pay careful attention to the
management of the actuators.
● Mount the switch body carefully so that it does not come in contact with the movable
door.
● Mount the switch body in a location where it cannot be reached or it is hidden so that it
cannot be easily disabled. Or, mount the switch body using M4 screws that require
special tools or mount it in such a way that it cannot be removed with ordinary tools.
● For detailed information about minimizing the probability that it might be disabled, refer to
relevant precautions described in ISO14119.
3-6 WUME-SGPUM-2