External Device Configuration - Mitsubishi Electric MELSEC iQ-F Series User Manual

External device configuration

Set the parameters for external devices communicating with the BACnet functions.
Double-click <Detailed Setting> of the "External Device Configuration".
Drag and drop "BACnet/IP Connection Module" from "Ethernet Device" in "Module List" to the left side of the window, and set
the following items.
Item
No.
Model Name
Communication Method
Protocol
Fixed Buffer Send/Receive Setting
PLC IP Address
Port No.
Sensor/Device MAC Address
Host Name
IP Address
Port No.
Subnet Mask
Default Gateway
Existence Confirmation
*1 Automatically set by "Ethernet Device".
*2 Do not specify 5549 to 5569 because they are used by the system.
Description
Connection number for distinguishing settings for each user
connection
The name of the external device is displayed.
Set the method for communications with the external
*1
device.
Set the communication protocol for the external device.
Not supported
The IP address of the own station (Ethernet module) is
displayed.
The port No. of the own station (Ethernet module) is
displayed.
Not supported
Not supported
Not used for BACnet communications
Not used for BACnet communications
Not used for BACnet communications
Not used for BACnet communications
Not used for BACnet communications
Setting range


BACnet/IP
*1
UDP


*2
1 to 5548, 5570 to 65534
(Default: 47808)







6 PARAMETER SETTINGS
6.3 Basic Settings
6
61