Mitsubishi Electric MELSEC iQ-F Series User Manual page 72

Program
(0) After 'ModuleREADY' (Un\G34, b0) is detected to be on, the initial value is set to each object, and 'BACnetStartupRequest' (Un\G37, b1) is turned on.
(26)The program writes 0: Operational to 'SystemStatus' (Un\G8500).
(42)The value of the counter is stored in the Accumulator object.
(63)The value of the analog input is stored in the AnalogInput object.
(72)Set the Reliability property to 2: OverRange when the analog input is out of the setting range.
(92)The ON/OFF information of the input X30 of the actual I/O is stored in the BinaryInput object.
(97)The operating status of the module is stored in the Multi-state Input object.
7 PROGRAMMING
70
7.3 Program Examples