Mitsubishi Electric MELSEC iQ-F Series User Manual page 70

• BinaryOutput Object Setting
• BinaryValue Object Setting
• Multi-state Input Object Setting
• Multi-state Output Object Setting
8.
Click the [Apply] button.
9.
Write the set parameters to the FX5 CPU module. Then, reset the FX5 CPU module or power off and on the system.
[Online]  [Write to PLC]
In the program example, default values are used for the parameters that are not shown above. For the
parameters, refer to the following.
Page 51 PARAMETER SETTINGS
7 PROGRAMMING
68
7.2 Parameter Settings