Enabling Port Mirroring - AudioCodes 400HD Series Administrator's Manual

Administrator's Manual
7.6

Enabling Port Mirroring

Port Mirroring when enabled changes the NIC from SWITCH to HUB (L2 to L3) so that
network traffic on the LAN port is reflected in the PC port for debugging purposes.
 To enable Port Mirroring:
Use the table below as reference.

Parameter
network/pc_port_mirroring/enabled
Version 3.4.4
Table 7-5: Port Mirroring Parameters
Enables port mirroring.
[0] Disable (default) - The LAN/PC Network

interfaces operate in SWITCH mode.
[1] Enable - The LAN/PC Network interfaces

operate in HUB mode.
193
Description
400HD IP Phones Series - Teams Compatible
7. Diagnostics