3.4.5
Configuring Dialing
This section shows how to configure Dialing parameters. Only the parameters documented
in this section are applicable.
3.4.5.1
Adjusting the DTMF Level
Network administrators can adjust the DTMF level of the phone to suit personal
requirements.
To adjust the DTMF level:
Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Parameter
voip/audio/gain/dtmf_tone_signal_level
Administrator's Manual
Table 3-20: Automatic Dialing Parameters
Range: 1-32. Default: 16
68
400HD IP Phones Series - Teams Compatible
Description
Document #: LTRT-09960