Configuring Port Mirroring; Table 7-4: Port Mirroring Parameters - AudioCodes 420HD Administrator's Manual

http://arttel.ru
7.6
Activate
[network/pc_port_mirroring/enabled]
Administrator's Manual
http://arttel.ru/shop/ip-telefony/ip-telefon-audiocodes-420hd

Configuring Port Mirroring

Port mirroring facilitates network traffic monitoring enabling administrators to analyze and
debug data or diagnose errors on a network, manage network performance and be alerted
to problems. Inbound or outbound traffic (or both) can be mirrored on single or multiple
interfaces. Port mirroring can be activated using the Web interface or the Configuration
File.
¾
To configure port mirroring using the Web interface:
1. Open the Recording page (Configuration tab > Network Connections menu >
Network Settings).
Figure 7-6: Web Interface - Port Mirroring
2. Configure using the table below as reference and click Submit.
¾
To configure port mirroring using the Configuration File:
„
Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.

Table 7-4: Port Mirroring Parameters

Parameter
400HD Series IP Phone with Microsoft Lync
Description
Enables port mirroring.
[0] Disable (default) - The LAN/PC Network
ƒ
interfaces operate in SWITCH mode.
[1] Enable - The LAN/PC Network interfaces
ƒ
operate in HUB mode. The network traffic on the
LAN port is reflected in the PC port.
124 Document #: LTRT-09936