Enabling Direct Voice Dialing; Table 3-24: Enabling Voice Dialing - AudioCodes 400HD Series Administrator's Manual

3.4.6

Enabling Direct Voice Dialing

Users can use the AudioCodes VocaNOM voice dialing service to directly voice dial other
parties by vocalizing their name. Additionally, the phone numbers of parties who are voice-
dialed are displayed in the the Call Log from where users can redial. The feature powers up
efficiency in organizations, increases productivity and improves users' telephony experience.
Users can configure a key which they can press and then vocalize the name of the party to
whose number the VocaNOM service will directly dial.

To enable voice dialing:
Open the Configuration File page (Management tab > Manual Update >

Configuration File) and configure the parameters using the table below as reference.
Parameter
voip/services/vocanom_server/enabled
voip/services/vocanom_server/ip_address
voip/services/vocanom_server/port
voip/services/vocanom/transport_mode
voip/services/vocanom/label
voip/services/vocanom/number
Note: All parameters must be configured for the user's VocaNOM key to be activated.
Administrator's Manual

Table 3-24: Enabling Voice Dialing

Enables or disables the method on user
[1] Enables the method 'Use VocaNOM server
directly' [0] Disables the method 'Use VocaNOM
server directly' (default)
Defines the IP address of the VocaNOM server.
Default: 0.0.0.0
Defines the port number on the VocaNOM server.
Its value must match Transport Mode.
5060 for UDP, TCP

5061 for TLS

Defines the Transport Mode for sending SIP
messages.
TLS

UDP

TCP

Defines the name of the key configured as
VocaNOM displayed in the idle screen, and the
name displayed in the screen that opens after
pressing the key. Default: VocaNOM
Defines the number to dial to the VocaNOM
Default: None
72
400HD IP Phones Series - Teams Compatible
Description
Document #: LTRT-09960
phones.
server.