Configuring Port Mirroring; Configuring Core Dump; Table 7-4: Port Mirroring Parameters - AudioCodes 400HD Series Administrator's Manual

7.6

Configuring Port Mirroring

Port mirroring facilitates network traffic monitoring enabling administrators to analyze and
debug data or diagnose errors on a network, manage network performance and be alerted
to problems. Inbound or outbound traffic (or both) can be mirrored on single or multiple
interfaces. Port mirroring can be activated using the Web interface or Configuration File.
 To configure port mirroring using the Web interface:
1. Open the Recording page (Configuration tab > Network Connections menu >
Network Settings).
2. Configure using the table below as reference and click Submit.
 To configure port mirroring using the Configuration File:
Open the Configuration File page (Management tab > Manual Update >

Configuration File) and configure the parameter using the table below as reference.
Parameter
Activate
[network/pc_port_mirroring/enabled]
7.7

Configuring Core Dump

The phone performs core dump to facilitate problem diagnosis and debugging. The
recorded contents of the phone's main memory are stored at a specific time, usually after
the phone crashes or is terminated abnormally, and made available for further examination.
To configure core dump using the Web interface:

1. Open the Core Dump page (Status&Diagnostics > Diagnostics > Core Dump).
Administrator's Manual
Figure 7-6: Web Interface - Port Mirroring

Table 7-4: Port Mirroring Parameters

Enables port mirroring.
[0] Disable (default) - The LAN/PC Network

interfaces operate in SWITCH mode.
[1] Enable - The LAN/PC Network interfaces

operate in HUB mode. The network traffic on the
LAN port is reflected in the PC port.
Figure 7-7: Web Interface – Core Dump
150
400HD Series for Skype for Business
Description
Document #: LTRT-09940