Signing In To The Phone; Testing The Phone; Changing The Order Of The Sign-In Method; Allowing Users To Display Phone # Or Ext # In Phone Screen - AudioCodes 400HD Series Administrator's Manual

Administrator's Manual
4. Navigate to the folder in which you stored the delta configuration .cfg file, select it, and
then click Submit; the configuration file is loaded to the phone.
2.2.5.2

Signing In to the Phone

For instructions on how to sign in through the phone's screen, see the phone's User's

Manual.
For instructions on how to sign in through the Web interface, see Section 4.23.

Note:
The RX50 by default does not include a sign-in key for users. Sign-in can be
performed by users with Administrator privilege (via MENU > Admin key). The
administrator can however change the privileges of the user for a sign-in to be available
to them, by changing the value of configuration file parameter 'account/sip/permission'
from ADMIN (default) to USER.
2.2.5.3

Testing the Phone

You must test the phone to see if the newly configured settings match your requirements.
See the User's Manual for information on how to operate the phone's functions and features.
2.2.5.4

Changing the Order of the Sign-In Method

Most enterprises prefer the 'PIN code' option to precede the 'Phone number' option as the
default method for signing in. In the default order, 'Phone number' precedes 'PIN code', but
administrators can change it.
 To change the default method for signing in:
In the Configuration File (Management tab > Configuration File), change the

'lync/sign_in/method' parameter value to NUMBER_AND_PIN.
2.2.5.5

Allowing Users to Display Phone # or Ext # in Phone Screen

Using parameter 'lync/sign_in/line_type_display/ext', you can allow users to define whether
to display their telephone number or their extension number in the phone's screen. This is
only possible if the enterprise's Active Directory includes both. Default: 1 (extension number).
2.2.5.6

Forcing Sign-in with PIN Code

Network administrators can force users to sign in with PIN code using Configuration File
parameter sign_in/pin_code_only. In this mode, the only sign-in option is with user extension
number and PIN code. Allowing only the basic PIN code option on the user's phone helps
avoid user mistakes and helps avoid storing the user password on the phone.
 To force sign-in with PIN code:
1. Open the Configuration File page in the Web interface (Management tab > Manual
Update > Configuration File).
2. Configure the parameter using the table below as reference.
Parameter
sign_in/pin_code_only
Version 3.4.4
2. Automatic Mass Provisioning of IP Phones using DHCP

Table 2-6: Forcing Sign-In with PIN Code

Determines which online sign-in method option must
be used.
39
Description
400HD IP Phones Series - Teams Compatible