Configuring Port Mirroring; Table 7-4: Port Mirroring Parameters - AudioCodes 420HD Administrator's Manual

7.6

Configuring Port Mirroring

Port mirroring facilitates network traffic monitoring enabling administrators to analyze and
debug data or diagnose errors on a network, manage network performance and be alerted
to problems. Inbound or outbound traffic (or both) can be mirrored on single or multiple
interfaces. Port mirroring can be activated using the Web interface or the Configuration
File.

To configure port mirroring using the Web interface:
1. Open the Recording page (Configuration tab > Network Connections menu >
Network Settings).
2. Configure using the table below as reference and click Submit.

To configure port mirroring using the Configuration File:

Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Parameter
Activate
[network/pc_port_mirroring/enabled]
Administrator's Manual
Figure 7-6: Web Interface - Port Mirroring

Table 7-4: Port Mirroring Parameters

Enables port mirroring.

[0] Disable (default) - The LAN/PC Network
interfaces operate in SWITCH mode.

[1] Enable - The LAN/PC Network interfaces
operate in HUB mode. The network traffic on the
LAN port is reflected in the PC port.
118
400HD Series IP Phone with Microsoft Lync
Description
Document #: LTRT-09935