Adding A Gpio Event Macro; Copying A Macro - Christie TruLife+ Griffyn 4K32-RGB User Manual

10. To save the macro, click Save.
If the time specified in a macro has expired, a warning icon depicting an expired macro is displayed in
the title bar.

Adding a GPIO Event macro

Create a macro which can be triggered through a GPIO input pin to automate projector actions by
external signals.
Up to 14 GPIO Event macros can be created.
This feature is only available on the web interface.
1. From the home page of the web interface, select MENU > Macros and GPIO.
2. Click the Add Macro.
If the limit of 24 total macros is reached, the Add Macro button is disabled and displays a
Limit Reached message.
3. In the Name field, enter a meaningful name for the macro.
4. From the Type list, select GPIO Event.
5. From the display of pins, select the input pin.
Only pins configured as input pins can have triggers. Output pins are disabled.
6. Select the type of transition: High to Low or Low to High.
An input pin can only have a maximum of two events, one for each transition type.
7. In the Serial Command field, enter the serial command(s) you want to run.
For available serial commands and their syntax, refer to the Christie TruLife+ Serial
Commands Guide (P/N: 020-103316-XX).
8. To test the functionality, click Test.
An Action succeeded message is displayed upon a successful test.
9. To save the macro, click Save.
If the input pin used in a GPIO Event macro has changed from input to output, a warning icon
depicting an invalid macro is displayed in the title bar.

Copying a macro

Duplicate a Scheduled Event macro to create another macro of similar functionality.
Up to 24 macros can be created. GPIO Event macros cannot be duplicated.
This feature is only available on the web interface.
1. From the home page of the web interface, select MENU > Macros and GPIO.
2. From the list of macros, click Duplicate next to the macro you want to copy.
If the limit of 24 macros is reached, the Duplicate button is disabled and the Add Macros
button displays a Limit Reached message.
Christie TruLife+ User Guide
020-103315-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Configuring communications
47