GE CT ProSpeed Series Installation Manual page 60

GE MEDICAL SYSTEMS
REV 15
3–3–3 Foot Switch Assy
1. Remove the front cover and note the location of the Foot Switch Assy.
2. Connect the foot switch cable from the Foot Switch Assy to CN9 on the OC INTF3 board (Slot #44) as shown in
Illustration 3–17.
3–4 OPTION BOARD LOCATIONS
Option boards such are ETC, MTC, ... should be inserted into the correct slots according to Table 3–1.
OC
ETC
Qj Type 9
Qj–b Type 10
Zj–a Type 15
Note SCSI, ISC: standard boards for all the types of OC
FOOT SWITCH CABLE WIRING
ILLUSTRATION 3–17
This section applies to Qj Type, Qj–b Type, or Zj–a Type OC.
TABLE 3–1
OPTION BOARD SLOT #
COMX/NEMA
–
–
14
CT PROSPEED SERIES INSTALLATION
FOOT SWITCH CABLE
Note
SLOT #
MTC ODC2
– –
– –
13 12
–: means "not available"
3-22
2124011
SCSI ISC
8 7
9 8
11 10