GE CT ProSpeed Series Installation Manual page 13

GE MEDICAL SYSTEMS
REV 0
Applicable Products and Subsystem Designators
This Installation Manual is written for the CT products listed in the table below.
Almost the same Gantry (except DAS/Detector), X-ray Generator, and Table subsystem models are commonly
used for these products.
Subsystem models Operator Console, DAS/Detector, and PDU (Power Distribution Unit) are not commonly used for
these products, as shown in the table.
Note also that the three different product models are named the same name ProSpeed."
In this manual, to refer to a correct subsystem, designators Qj Type", 'SS Type", ... , as written in the OC Designa
tor", DAS/Detector Designator", and Model Number" columns are used.
PRODUCT NAME
ProSpeed S
ProSpeed SX
Lemage
ProSpeed
(See Note 1)
ProSpeed S Fast
ProSpeed SX Power
Lemage SX
Lemage SX/E
ProSpeed
Lemage Supreme
ProSpeed VX
ProSeed Accell
ProSeed Accell EI
ProSpeed
ProSeed
ProSpeed Plus
ProSeed EF
ProSpeed Advantage
ProSeed SA
Note 1 This ProSpeed is an upgraded model of ProSpeed S or ProSpeed SX (GEMS-AM and GAMS-A).
Note 2 ProSpeed, ProSpeed SX Power, or Lemage SX can have an SS Type DAS/Detector by an option, otherwise,
these have an Xe Type DAS/Detector.
Note 3 In the case of Upgrade, P9180AB or P9180AF PDU will still be used instead of 2121798 PDU.
LCD
Qj/Qj-b
TYPE OC
NOTE
OPERATOR CONSOLE (OC)
Operation CPU OC
Display Device Board Designator
Liquid Crystal CPW Qj Type
Display
Qj-b Type
Plasma Display FMP1 Zj Type
Zj-a Type
CPW
PD
Zj/Zj-a
Xe TYPE
TYPE OC
CT PROSPEED SERIES INSTALLATION
DAS/DETECTOR
Detector DAS/Detector
Type Designator
Xe Gas Xe Type
(See Note 2)
Solid-state SS Type
Xe Gas Xe Type
SS Type
Solid-state
SS TYPE
P9180AB/AF
iii
2124011
PDU
Model
Number
P9180AB/
P9180AF
2121798
(See Note 2)
P9180AB/
P9180AF
2121798
(See Note 3)
2121798