GE CT ProSpeed Series Installation Manual page 59

GE MEDICAL SYSTEMS
REV 15
3–3–2 OC CRT (continued)
4. Connect the power cable to the CRT power socket as shown in Illustration 3–16.
5. Connect the signal cable to CN13 on the MV–AMP II board at the front of the OC (Slot #1).
6. Return the fan panel to its original position and screw it into place using the screws removed in step 2.
SOCKET
CRT POWER CABLE
CRT POWER CABLE CONNECTION IN OC
ILLUSTRATION 3–16
3-21
CT PROSPEED SERIES INSTALLATION
2124011