Table of Contents
Advertisement
Essential instructions
Read this page before proceeding!
Your instrument purchase from Emerson is one of the finest available for your particular application. These instruments have been
designed and tested to meet many national and international standards. Experience indicates that its performance is directly
related to the quailty of the installation and knowledge of the user in operating and maintaining the instrument. To ensure
continued operation to the design specifications, read this Manual thoroughly before proceeding with installation,
commissioning, operation, and maintenance of this instrument. If this equipment is used in a manner not specified by the
manufacturer, the protection provided by it against hazards may be impaired.
•
Failure to follow the proper instructions may cause any one of the following situations to occur: loss of life, personal injury,
property damage, damage to this instrument, and warranty invalidation.
•
Ensure that you have received the correct model and options from your purchase order. Verify that this Manual covers your
model and options. If not, call 1-800-854-8257 or 949-757-8500 to request the corrrect Manual.
•
For clarification of instructions, contact your Rosemount representative.
•
Follow all warnings, cautions, and instructions marked on and supplied with the product.
•
Use only qualified personnel to install, operate, program, and maintain the product.
•
Inform and educate your personnel in the proper installation, operation, and maintenance of the product.
•
Install equipment as specified in the installation section of this Manual. Follow appropriate local and national codes. Only
connect the product to electrical and pressure sources specified in this Manual.
•
Use only factory documented components for repair. Tampering or unauthorized substitution of parts can affect product
performance and cause unsafe operation of your process.
•
All equipment doors must be closed, and protective covers must be in place unless qualified personnel are performing
maintenance.
WARNING
Risk of electrical shock
Installation and servicing of this product may expose personnel to dangerous voltages.
Equipment protected throughout by double insulation.
Disconnect main power wired to separate power source before servicing.
Do not operate or energize instrument with case open.
Signal wiring within this box must be rated at least 240 V.
Non-metallic cable strain reliefs do not provide grounding between conduit connections. Use grounding type bushings and
jumper wires.
Unused cable conduit entries must be securely sealed by non-flammable closures to provide exposure integrity in compliance
with personal safety and environmental protection requirements. Unused conduit openings must be sealed with Type 4X or
IP66 conduit plugs to maintain the ingress protection rating (Type 4X).
Electrical installation must be in accordance with the National Electrical Code (ANSI/NFPA-70) and/or any other national or
local codes.
Operate only with front panel fastened and in place.
Proper use and configuration is the operator's responsibility.
CAUTION
Radio interference
This product generates, uses, and can radiate radio frequency energy and thus can cause radio communication interference.
Improper installation or operation may increase such interference. As temporarily permitted by regulation, this unit has not been
tested for compliance within the limits of Class A computing devices, pursuant to Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection against such interference.
Operation of this equipment in a residential area may cause interference, in which case the operator, at his own expense, will
be required to take whatever measures may be required to correct the interference.
2
Advertisement
Table of Contents
