Chapter 1 Maintenance - NEC Express 5800 Series Maintenance Manual

NEC Express5800 Series
Express5800/T110f-S, R110f-1E, T110f-E
This chapter explains inspection and maintenance procedures, and what actions are to be taken in case of
trouble when operating this server.
1. Transfer, Movement, and Disposal
Describes how to transfer and move this server to a third party. Also describes how to dispose and store this
server.
2. Daily Maintenance
Describes what you must confirm for daily use, how to manage files, and how to clean the server.
3. User Support
Describes various services on this product. Services are offered from NEC and the maintenance service
companies authorized by NEC.
4. Collecting Failure Information
Describes how to collect information about the location where a failure occurred and its cause when the
server malfunctions. See this section in case of a failure.
5. Troubleshooting
Describes how to identify the causes of problems and what actions are to be taken to address them. See this
section when you suspect a failure.
6. Windows System Recovery
Describes Windows recovery setup. See this section when the Windows is corrupt.
7. Resetting and Clearing the Server
Describes how to reset or clear the server. See this section when the server is not working or when you wish
to restore the settings made in BIOS to the factory settings.
8. System Diagnostics
Describes system diagnostics of this server and checking connection status check.
9. Offline Tools
Describes tools for preventive maintenance of this product.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
Maintenance
13