NEC Express 5800 Series Maintenance Manual page 67

Chapter 2 Useful Features
(5) Storage Configuration submenu
On Advanced, choose Storage Configuration and then press <Enter> key to display the menu screen shown
below. For the menu that has
submenus.
SATA Information
SATA Mode
Hard Disk Drive Pre-Delay
on the left, move the cursor to it and then press <Enter> key to show its
Option
Disabled
[IDE Mode]
AHCI Mode
RAID Mode
[Disable]
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Note
NEC has not verified AHCI driver support.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
Parameter
−
This option is not displayed when SATA Mode
is RAID Mode.
Specifies SATA Mode.
For the models that show RAID Mode, this
option is only for display.
Specifies delay time before HDD is accessed
during POST.
1. System BIOS
Description
[ ]: Factory setting
67