NEC Express 5800 Series Maintenance Manual page 61

Chapter 2 Useful Features
(2) Memory Configuration submenu
On Advanced, choose Memory Configuration and then press <Enter> key to display the menu screen shown
below. For the menu that has
submenus.
Memory Information
Hardware Memory Test
Memory Retest
Memory Frequency Limit
Memory Voltage
on the left, move the cursor to it and then press <Enter> key to show its
Option
[Disabled]
Enabled
[No]
Yes
[Auto]
1066 MHz
1333 MHz
1600 MHz
1.5 V
[1.35 V]
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
Parameter
−
Specifies whether to perform a memory test.
Enabled : if an error is detected during the
test, the applicable memory resource will be
disabled.
Yes : the memory error is cleared and all
DIMMs are tested on the next POST process.
This option is automatically changed to No
after starting the server.
Specifies the upper limit of the memory
frequency. The frequency may be lower than
the specified value depending on the memory
configuration.
Specifies the memory voltage.
This option is changed automatically for safe
operation, if necessary.
1. System BIOS
Description
−
[ ]: Factory setting
61