Problem Of Starting Os - NEC Express 5800 Series Maintenance Manual

Chapter 1 Maintenance
[?] The following message appears when installing the OS, and you cannot proceed.
→ The USB optical disk drive in which EXPRESSBUILDER is inserted may be connected to a USB 3.0 port.
Connect the optical disk drive to a USB 2.0 port.
See Chapter 1 (4. Names and Functions of Parts) in User's Guide.
→ To install the OEM drivers, copy the files of each Windows family to removable media.
5.4

Problem of Starting OS

[?] Unable to start OS
Has the BIOS configuration of the RAID Controller changed?
→
Set the correct BIOS configuration with a RAID Configuration Utility (LSI Software RAID Configuration
Utility, WebBIOS).
Is the RAID Controller recognized by POST?
→
Turn on the power after the RAID Controller is recognized as being connected successfully.
→
If the RAID Controller is not recognized as being connected successfully, the RAID Controller may be
faulty. Contact the maintenance service company with which you signed up or the dealer where you
purchased the product.
Is RAID Controller inserted firmly straight into the PCI slot?
→
Install the RAID Controller properly.
Is the RAID Controller mounted on the PCI slot for which the mounting is restricted?
→
Check the mounting restrictions of the server and then mount the RAID Controller on the correct slot.
If the RAID Controller is not recognized as connected although the above action has been taken, the
RAID Controller may be faulty. Contact the maintenance service company with which you signed up or
the dealer where you purchased the product.
Are Hard Disk Drives properly installed?
→
Install the RAID Controller properly.
Is SAS cable connected to Hard Disk Drive correctly?
→
Connect the SAS cable properly.
If the SAS cable is not recognized as connected although the above action has been taken, the Hard
Disk Drive may be faulty. Contact the maintenance company with which you signed up or the dealer
where you purchased the product.
Is the EXPRESSBUILDER DVD inserted?
→
Eject the EXPRESSBUILDER DVD and reboot.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
5. Troubleshooting
31