Post Error Message - NEC Express 5800 Series Maintenance Manual

Chapter 3 Appendix
1.

POST Error Message

If POST detects a problem, an error message is displayed or a beep code sounds.
The message indicates that DIMM1 and
DIMM2 have failed, and that DIMM1 has
been forcibly started up.
The next table lists the error messages and the actions to solve the problem.
System Monitoring Check
... Passed
ERROR
AE81: DIMM1 with error is enabled.
AE02: DIMM2 has been disabled.
Press <F1> to resume, <F2> to setup
Tips
Write down the displayed messages and the beep code before contacting your
sales representative. The messages are useful information for maintenance.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
1. POST Error Message
133