Boot - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
1.2.5

Boot

Boot menu appears when the cursor is moved to Boot.
Boot Configuration
Quiet Boot
Bootup Numlock State
Setup Prompt Timeout
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
CD/DVD ROM Drive BBS Priorities
Floppy Drive BBS Priorities
Hard Drive BBS Priorities
Network Drive BBS Priorities
Option Parameter
Disabled
[Enabled]
On
[Off]
[0] - 65535
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
−
Specifies whether to display the logo during POST.
Disabled : the results of POST execution are
displayed instead of the NEC logo after the power is
turned on.
If BIOS Redirection Port is enabled, this option is
always disabled.
Enables or disables Numlock.
Specifies the time (in seconds) until <F2> is pressed to
launch SETUP.
The specified value is reflected to waiting time
immediately before completion of POST.
−
−
These items display the priority of boot devices.
If all of the Boot Options are set to Disabled, the
−
SETUP starts running upon completion of POST.
−
−
−
Specifies the boot priority for each BIOS Boot
Specification (BBS).
−
−
−
1. System BIOS
Description
−
−
[ ]: Factory setting
81