Configuration; Introduction - RACOM RAy3 User Manual

5. Configuration

5.1. Introduction

The following configuration buttons are used for configuration:
• Apply
Apply and save parameters.
• Cancel
Set parameters are overwritten with original values.
• Refresh
Reload all current values of the unit / both units.
• Show defaults
Clicking the button displays the default values of all individual parameters on the current screen. To
use these values, you must click on the "Apply" button.
• Show backup
Clicking the button displays the values of individual parameters held in the backup file (Backup/Set-
tings/Open file upload). To use any of these values, you must use the "Apply" button. For loading
the backup configuration see menu Tools/Maintenance/Backup.
• Start
Activating automatic refresh fields marked by
1 sec.
• Stop
Use the "Stop" button to stop automatic refresh of displayed information with 1sec period. Date and
time values are refreshed anyway.
Fig. 5.1: Configuration Controls
Help
The microwave link configuration system is equipped with built in Help - see Help section. The Help is
accessible in two forms:
• Configuration parameter context help. The help text is displayed in the pop-up window after clicking
the parameter name.
• The whole user interface help, activated by clicking the Help menu.
© RACOM s.r.o. – RAy3 Microwave Link
icon using the Start button with the frequency circa
Configuration
77