Step-by-step Guide
3.1.5. Applying Feature keys
Menu Maintenance / Feature keys
The firmware of the microwave link is capable of controlling several features (for example the maximum
user data speed, maximum Tx power, etc.). It is recommended to install all separately purchased feature
keys prior to physical installation to allow all expected features of the link to be usable after the install-
ation.
Fig. 3.6: Configuration menu Tools / Maintenance / Feature keys
Note
Speed keys purchased with the unit are installed in the factory (and can be double checked
within this menu). Key for limited Tx power is not installed except specifically ordered. If RCinfo
limits the maximum power, it cannot be overruled by feature key with the higher Tx power.
For full explanation of possibilities of this screen see Section 5.6.1.2, "Feature keys" in Chapter 5,
Configuration.
46
RAy3 Microwave Link – © RACOM s.r.o.