Working With Cli - RACOM RAy3 User Manual

6.2. Working with CLI

• Overview of CLI options
cli_help
Fig. 6.1: CLI menu
• Parameters of CLI commands are listed in the help. For example:
help listing
-h
target unit
-t
local, default option
-t l
both, both units, command item for remote unit has PEER_ prefix
-t b
peer, opposite unit, when reading using the show command
-t p
• When inserting commands, using the tabulator can help
• An incorrect command is rejected (e.g. inserting forbidden frequency)
• A parameter that caused the loss of the connection is restored after 1 minute (Rollback)
• Reading parameters of local unit
cli_cnf_show
• Reading radio parameters of peer unit
cli_cnf_show -t p | grep RADIO
• Entering parameters (TX power of local unit)
cli_cnf_set RADIO_TX_PWR=-3
Items of command (RADIO_TX_PWR=) are taken from the list cli_cnf_show
© RACOM s.r.o. – RAy3 Microwave Link
Command Line Interface
171