Radio Adaptation - RACOM RAy3 User Manual

Configuration

5.6.1.4. Radio adaptation

Fig. 5.42: Menu Tools / Maintenance / Radio adaptation
Band index
• Band index
Band index displays radio channel assignment of local unit transmitter (Tx) for L (Lower) or U (Upper)
part of the frequency band.
○ Change button
Change button changes the band index (L -> U and U-> L). If units are linked together both Local
and Peer units are changed in the same time.
Note
Change button applies only for 17 GHz and 24 GHz links, where hardware of each RAy
unit is universal for the entire frequency band. Changing band index is allowed only in
symmetric mode (i.e. Tx bandwidth is the same as Rx bandwidth).
Note
After restoring factory settings Band index is set to its pre-defined state L or U as typed on
Product Label.
Warning
When the radio type is changed, the "Link settings" menu parameters of each unit are reset
to default values except login / password details.
150 RAy3 Microwave Link – © RACOM s.r.o.