Ray Tools App For Mobile Devices - RACOM RAy3 User Manual

7. RAy Tools app for Mobile devices

RAy Tools is a stand-alone application designed to perform all steps of
establishing a new link and operate it. It is optimised for use on mobile
devices with smaller displays and especially in challenging conditions.
RAy Tools supports the following functions:
○ Link Calculation – to calculate or verify the link budget
○ Antenna Alignment – indicates current RSS and MSE values, optionally
with acoustic indication, for convenient antenna alignment
○ Link Management – standard web-based unit management
Antenna Alignment and Link Management functions require a WiFi con-
nection to the RAy unit. It has to be established by the user before those
2 functions can be used.
RAy WiFi network name is "RAy Code + RAy Serial Number" (for example
"RAy3-24-1234567890").
Note
WiFi on the RAy unit is active only if RAy WiFi module is present
and its functionality is allowed in RAy management (permanently
or only during air link loss - for WiFi setup see Section 1.4.2,
"Service WiFi - optional (using USB „S")").
Every RAy3 shipped from the factory is equipped by a WiFi
module and the WiFi is allowed with no password (one should
be set immediately by the user).
© RACOM s.r.o. – RAy3 Microwave Link
RAy Tools app for Mobile devices
175