Jirous Antennas Mounting - RACOM RAy3 User Manual

Fig. 4.3: Fixing screws
Common for all antennas is a holder which ensures:
• fixing of the antenna to the mast
• flexibility in two planes (necessary for antenna adjustment to the proper direction).
Each holder allows at least 2 methods of mounting antenna on the mast tube:
• right-side mounting
• left-side mounting
Following sections describe in detail installation of antennas, mounting kits and/or flexible waveguides,
so the antenna is ready for mounting RAy unit to it. Choose below a chapter relevant for your antenna
supplier and installation manual according to antenna type and size.
Note
Each antenna allows RAy unit to be mounted on it with horizontal or vertical polarization. This
is discussed in detail in Section 4.3, " RAy Unit mounting".

4.2.1. Jirous antennas mounting

Mounting instructions for Jirous antennas are available on the manufacturer's website http://en.jirous.com.
Mounting is also described in detail on RACOM RAy download
• Installation of Jirous antennas ANT-JRM-inst.pdf
optionally with strut for 120 cm Jirous antenna
4 pcs M8×30 (Allen) screws to mount the RAy unit to the antenna are part of the antenna delivery.
1
https://www.racom.eu/eng/products/microwave-link.html#download
2
https://www.racom.eu/download/hw/ray/free/eng/04_anteny/ANT-JRM-inst.pdf
© RACOM s.r.o. – RAy3 Microwave Link
1
section:
2
Installation
51