Rstp Status - RACOM RAy3 User Manual

Configuration
• Size 1024-max octets
Total frames received (and/or transmitted) with a length of between 1024 and MaxSize (see MTU
parameter) octets inclusive, including those with errors.
• Histogram counters mode
Frame size histogram counters can count received and/or transmitted octets. The mode of histogram
counters is indicated here.
• Measure time
This is the time interval, the diff column is valid for. The "diff" column shows the difference of the
actual value of the counters at the moment of pressing the Difference button and the value of the
counters at the moment of pressing the Refresh button.
• Refresh, Difference
In another way: The Difference counter reference value can be reset by pressing the Refresh button.
The time point at which the Difference counter sample is triggered and the "diff" value is calculated
is defined by pressing the Difference button. The "total" column always shows the actual values. It
is refreshed either by pressing the Refresh and also the Difference button.

5.5.1.3. RSTP status

This page and RSTP root bridge functionality is available only for FW 1.0.19.0 and earlier.
Page allows to check the status of RSTP root bridge daemon. For more information about RSTP and
root bridge settings see section 5.5.3. Advanced / RSTP setup.
Fig. 5.20: Menu Switch settings / Status / RSTP status
The page calls CLI command which checks the status of RSTP root bridge daemon (running or not
running).
110 RAy3 Microwave Link – © RACOM s.r.o.