Leax-Ray Antenna Mounting; Other Antennas Mounting - RACOM RAy3 User Manual

Installation
Note
1.2m Jirous antennas on windy sites (max wind speed above 50 m/s) has to be installed with
optional struts ANT-JRZ-1200-STRUT-F
Strut allows to increase operational wind speed (typically up to 65 m/s). Consult Jirous website
for exact parameters and additional info.
Ensure the pin lubrication is completed during assembly.

4.2.2. LEAX-RAy antenna mounting

Mounting instructions for LEAX-RAy antenna are shipped with each antenna. Identical mounting instruc-
tions are available within RACOM RAy download
• Installation of 0.3m antennas - ANT-LEAX-300-inst.pdf
• Installation of 0.6m antennas - ANT-LEAX-600-inst.pdf
• Installation of 0.9m antennas - ANT-LEAX-900-inst.pdf
optionally with standard strut ANT-LEAX-RAy-900-STRUT
• Installation of 1.2m antennas - ANT-LEAX-1200-inst.pdf
optionally with extra strut ANT-LEAX-RAy-1200-STRUT
• Installation of RAy interface for LEAX-RAy antennas - ANT-LEAX-RAy-inst.pdf
(same for all sizes). The RAy interface is part of each LEAX-RAy delivery (one interface set per
antenna). It needs to be mounted to each antenna according to the instruction manual before
mounting the RAy unit. Four pcs M8x30 (Allen) screws to mount the RAy unit to the antenna are
also part of the antenna delivery.
Note
0.9m and 1.2m LEAX-RAy antennas on windy sites (max wind speed above 50 m/s) has to
be installed with optional struts
(instead of 50 m/s respectively 55 m/s). They also allow to use tower pipe Ø50-120 mm (instead
standard Ø90-120 mm). Consult LEAX website
Ensure the pin lubrication is completed during assembly.

4.2.3. Other antennas mounting

Antenna which do not have a direct interface to RAy needs also a proper antenna mounting kit
flexible waveguide with a mounting kit
ation to the antenna.
3
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
4
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
5
http://en.jirous.com
6
https://www.racom.eu/eng/products/microwave-link.html#download
7
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-300-inst.pdf
8
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-600-inst.pdf
9
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-900-inst.pdf
10
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
11
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-900-strut-inst.pdf
12
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-1200-inst.pdf
13
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
14
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-1200-strut-inst.pdf
15
https://www.racom.eu/download/hw/ray/free/eng/04_1_anteny/ANT-LEAX-RAy-inst.pdf
16
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
17
https://www.leax-arkivator-telecom.com/en/products/microwave-antennas.html
18
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
19
https://www.racom.eu/eng/products/microwave-link.html#accessories_antennas
52
3
(fixed) or ANT-JRZ-1200-STRUT-A
6
section, on our website. See list below:
7
8
9
16
. They allow to increase operational wind speed up to 65 m/s
17
19
for it. Such interface has to be installed prior to RAy unit install-
10
- ANT-LEAX-strut-std-inst.pdf
12
(includes standard strut)
13
- ANT-LEAX-strut-extra-inst.pdf
for exact parameters and additional info.
RAy3 Microwave Link – © RACOM s.r.o.
4
(adjustable).
5
11
14
15
18
or a