Parameters 2 - RACOM RAy3 User Manual

Tab. 9.2: Parameters 2
RAy3
User interface RJ45
User interface SFP
Service interface
Synchronization
Config. & Manag.
Encryption
Power
Power consumption
Operating temperature
range
Surge immunity
ESD immunity
Mechanical design
IP code
Dimensions
Weight
Antenna
Spectrum
EMC
Safety
FCC / IC
3)
Model RAy3-24S (produced December 2018 till April 2019) has MTU 2048 bytes. All other models
have MTU 10240 bytes.
4)
Encryption is possible only with model variants 'X, 'S' and 'E'. Variants 'S' and 'X' means the unit is
equipped with HW module for encryption acceleration, variants 'E' and 'N' are not equipped. Variant
'E' allows SW encryption, while variant 'N' does not allow any encryption to be used.
© RACOM s.r.o. – RAy3 Microwave Link
1 Gb Eth. (10/100/1000) 1000BASE-T, MTU 10240 bytes
recommended cable S/FTP Cat.6, Cat.7
1 Gb Eth. (10/100/1000) 1000BASE-T / 1000BASE-SX / 1000BASE-LX,
3)
MTU 10240 bytes , user exchangeable SFP, power consumption max. 1.25 W
USB 2.0, Host-A: USB / WiFi, USB / ETH
Synchronous Ethernet; IEEE-1588v2, Transparent clock
Web, CLI (HTTP, HTTPS, SSH, Telnet)
4)
AES 128, 192, 256
Floating, PoE IEEE 802.3at
PoE injector (20-60 VDC), DC/RJ45 (20-60 VDC)
22.5 W (typ.) – 24.5 W (incl. SFP)
-30 to +55°C (EN 300 019-1-4, class 4.1.)
4 kV according to EN 61000-4-5
8 kV according to EN 61000-4-2
FOD (Full Outdoor), antenna mounting compatible with RAy1 and RAy2
IP66 (Ingress Protection)
245 × 245 × 160 mm
2.6 kg
Class 3, 0.3 – 1.2 m, direct mounting (Jirous or LEAX/Arkivator or others)
EN 300 440 V2.2.1
EN 301 489-1 V2.1.1
EN 301 489-3 V1.6.1
EN 301 489-4 V3.1.1
EN 62368-1:2014 + A1:2017
CFR 47 part 15 (SQT-RAY3-24) / (24993-RAY324) - for RAy3-24 only
Technical parameters 2
Technical parameters
3)
,
ver. 1.3
183