Service Interfaces - RACOM RAy3 User Manual

Product

1.4. Service interfaces

Slot „S" stands for "Service". It contains system connectors – standard USB port and a pair of contacts
for RSS voltage output (red + gray ones). Also HW button and Status LED are located there.
Fig. 1.13: Slot S
Slot Function
USB service connector
For USB/WiFi or USB/ETH adapters, see Section 1.4.1, "USB connector ( S )"
RSS voltage output
Red and green connectors (for example 0.547 V means RSS = –54.7 dBm),
see Fig. 1.17, "RSS voltage contacts"
S
HW button
For service purposes: Internal backup or Factory settings,
see Section 5.6.1, "Maintenance"
Status LED
Visible through semitransparent plug,
see Section 1.5, "Status LED ( S )"
22 RAy3 Microwave Link – © RACOM s.r.o.