Web Interface - HMS Anybus Wireless Bridge II Startup Manual

Configuration
4 Configuration
Anybus Wireless Bridge II is normally configured via the web interface or using
one of the pre-configured Easy Config modes.
Advanced configuration can be carried out by issuing AT commands via the web
interface or over a Telnet or RAW TCP connection to port 8080.
4.1

Web Interface

The web interface is accessed by pointing a web browser to the IP address of
the unit. The default address is 192.168.0.99.
The configuration settings are described in detail in the User Manual.
®
Anybus Wireless Bridge II
™
Startup Guide
11 (18)
SP2167 2.1 en-US