General Safety Instructions - HMS Anybus Wireless Bridge II Startup Manual

Safety
2 Safety
2.1

General Safety Instructions

2.2 External Antenna Restrictions
For models with external antenna, only use antennas that are certified for use
with this equipment. Using external antennas that are not certified for use with
this equipment will invalidate its certifications and make it non-compliant with
the regulations for radio equipment.
A list of certified antennas can be found at www.anybus.com/support.
®
Anybus Wireless Bridge II
Caution
This equipment emits RF energy in the ISM (Industrial, Scientific, Medical)
band. Make sure that all medical devices used in proximity to this
equipment meet appropriate susceptibility specifications for this type of
RF energy.
Caution
The M12 power and LAN connectors must be provided with tool
operated mechanical lock nuts that are tightened by the installer.
This equipment is recommended for use in both industrial and domestic
environments. For industrial environments it is mandatory to use the
functional earth connection to comply with immunity requirements. For
domestic environments the functional earth must be used if a shielded
Ethernet cable is used, in order to meet emission requirements.
This equipment contains parts that can be damaged by electrostatic
discharge (ESD). Use ESD prevention measures to avoid damage.
™
Startup Guide
4 (18)
SP2167 2.1 en-US