The Web Interface - HMS Anybus Wireless Bolt Installation Manual

Configuration
3 Configuration
Anybus Wireless Bolt can be configured either by setting individual parameters
in the web interface or by using a pre-configured Easy Config mode.
Advanced configuration can be carried out by issuing AT (Hayes) commands in
the AT Commands tab in the web interface, or over Telnet to port 8080. A list of
the supported AT commands is available at www.anybus.com/support.

The Web Interface

The web interface is accessed by pointing your web browser to the IP address of
the internal web server in Wireless Bolt. The default address is 192.168.0.99.
Most configuration settings are self-explanatory. For detailed information about
the settings, see the Anybus Wireless Bolt User Manual.
Anybus ® Wireless Bolt ™
The web interface is designed for the latest versions of Internet Explorer,
Chrome, Firefox and Safari. Other browsers may not be supported.
Installation Guide
8 (16)
SCM-1202-006/SP2139 1.7