The Web Interface - HMS Anybus Wireless Bridge II Startup Manual

Configuration
3 Configuration
Anybus Wireless Bridge II can be configured via the web interface or using one
of the pre-configured Easy Config modes.
Advanced configuration can be carried out by issuing AT commands via the web
interface or over a Telnet or RAW TCP connection to port 8080.
3.1

The Web Interface

The web interface is accessed by pointing your web browser to the IP address of
the Wireless Bridge. The default address is 192.168.0.99.
Most configuration settings are self-explanatory. See also the Anybus Wireless
Bridge II User Manual.
Anybus ® Wireless Bridge II
The web interface is designed for the current stable versions of Internet
Explorer, Chrome, Firefox and Safari. Other browser versions may not
support all functions of the interface.
™ Startup Guide SCM-1202-013/SP2167-EN 1.7
9 (16)