Changing The Needle Position; Changing The Stitch Length - VERITAS Bessie Instruction Manual

W N eedle Position and Stitch Length
Changing the needle position and stitch
01 03 04
00 02
B-05
length
1

Changing the needle position

T
These setting apply only to Direct Patterns 1– 4 or
B Group Patterns 01. The pre-set position is „3.5",
center position. When you press the "−" of stitch
width adjustment button, the needle position will be
moved to the left. When you press the "+" of stitch
width adjustment button, the needle position will be
moved to the right. On the LCD screen, the point illus-
tration and the number indicate the needle position.
1
2

Changing the stitch length

To shorten the stitch length, press the "−" of stitch
length adjustment button. For a longer stitch length,
press the "+" of stitch length adjustment button.
Generally speaking, the thicker the fabric, thread and
needle, the longer the stitch should be.
2
41