Drawing Up The Lower Thread - VERITAS Bessie Instruction Manual

Drawing up the lower thread

1
3
22
2
4
Drawing up the lower thread
1. Hold the upper thread with the left hand. Turn the
handwheel towards you (counterclockwise) lower-
ing, then raising the needle.
2. Gently pull on the upper thread to bring the bobbin
thread up through the needle plate hole.
3. The bobbin thread will come up in a loop.
4. Pull both threads to the back under the presser
foot.
5. Threading control for bobbin thread
– If the bobbin thread is correctly threaded, it is lead
over the bobbin at a slight angle (1.).
Very important: If the thread is not visible at this
point, heavy disturbances occur during sewing (thread
tension completely wrong, „thread nests" on the
bottom etc.). The bobbin and the bobbin thread have
to be rethreaded (see page 35).