Darning Stitch - VERITAS Bessie Instruction Manual

Darning Stitch

W
Patterns
B-24 B-25
23 24
D
Patterns
➊
➌
➋
NOTE
Make no
gap here
NOTE
Make no
gap here
➍
NOTE
Make no
gap here
Patterns
NOTE
Make no
gap here
Darning stitch
Select pattern 23 or 24 to get the darning stitch.
➊
Change the presser foot to the buttonhole foot.
Baste the upper fabric and the reinforcement fabric
➋
together. Select the width of the pattern by using the
stitch width button.
Lower the presser foot over the center of the tear.
Pull the button holder to rear. Set the button guide
➌
plate on buttonhole foot to the desired length.
The size of the darning cycle is variable. However,
➍
the maximum stitch length is 2.6 cm (1 inch) and the
maximum stitch width is 7 mm (9/32 inch).
a The length of darning pattern
b The width of darning pattern
53